Serving the Hayward area  ·  (510) 901-4954  ·  Open Mon-Sun 7am-7pm
📞 (510) 901-4954 Free Quote

Metal Roofing in Union City, CA (94544) · Local Professionals

Hayward Metal Roofing · Fast response in Union City and the Hayward area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+224Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Union City is a city of practical, hardworking neighborhoods, from the flat, shingle-covered subdivisions of 1970s to 2000s tract homes near Alvarado Boulevard and Union Landing to the larger split-levels climbing toward the hills off Whipple Road. Those broad shingle roof planes take a beating from hot, dry summers and brisk afternoon bay winds, and when they start to fail, they fail quietly until a leak shows up in the ceiling.

Homeowners in Union City (94544) call Hayward Metal Roofing because we know this housing stock and what it needs. We have worked on roofs from the older ranches near Kennedy Park to newer stucco homes close to the Union City BART station, and we bring the same direct, no-nonsense approach to every job. If you are tired of replacing shingles every 15 years, metal is worth a serious look.

Metal Roofing in Union City (94544)

Most Union City homes sit on flat or gently sloping lots, but the soil here is clay-heavy, and that matters for drainage. When we install a metal roof, we pay close attention to how water will sheet off and where it will go, especially on the low-pitch roofs common in the 1970s and 1980s subdivisions. The hot, dry summers also mean that attic ventilation and reflective coatings can make a real difference in comfort and energy bills. And because many of these homes are two-story with tight side yards, we plan panel delivery and staging carefully to avoid damaging landscaping or blocking neighbors.

Our team has installed standing seam, corrugated panels, and metal shingles across Union City and the surrounding Hayward area. We understand the local building department's permit process for re-roofs, and we know how to work with HOA design review when a neighborhood has one. Whether your home is a simple ranch or a larger hillside property, we can recommend the right metal system for your roof's pitch and your budget.

Our services in Union City

How a Job Works in Union City

Step 1: Call us at (510) 901-4954 or request a free estimate online. We will schedule a time to inspect your roof, measure it, and talk through your options. You will get a written estimate with clear pricing and no pressure.

Step 2: Once you approve the estimate, we pull the necessary permits from the City of Union City and order materials. On installation day, our crew arrives early, protects your landscaping, and gets to work. If your home is in an HOA, we coordinate any required approvals before we start, so there are no surprises.

Step 3: When the job is done, we do a thorough cleanup, including magnet sweeping for nails. We walk the roof with you, show you the finished work, and make sure you are completely satisfied before we leave. We leave your property clean and your roof ready for decades of service.

Pricing for metal roofing in Union City depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and coating or painting starts at $2.50 per square foot. For a precise quote on your Union City home, call us at (510) 901-4954. We offer free estimates and honest advice.

My 1970s ranch near Alvarado Boulevard has original shingles that are curling. Can I put metal over them?
In many cases, yes. A metal roof over shingles (retrofit) can save you the cost of tear-off, but it depends on the condition of the existing roof and local code limits on the number of layers. We will inspect your roof and let you know if a retrofit is a good option for your home.
A windstorm just peeled back some panels on my roof near Kennedy Park. How fast can you respond?
We prioritize storm damage calls. Call us at (510) 901-4954 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot home in Union City?
For a 1,500 square foot home with a simple roof, a metal roof replacement might range from $13,500 to $18,000, depending on the material and accessibility. Standing seam would be at the higher end. We provide free estimates so you can get an exact price for your home.
Do I need a permit to replace my roof in Union City?
Yes, a roofing permit is typically required for a full replacement or re-roof in Union City. The exact requirements and fees are set by the city's building department, and we handle the permit application for you as part of our service.
My HOA requires approval for exterior changes. Can you help with that?
We can provide the documentation your HOA needs, such as product specifications and color samples, and we will coordinate with your HOA to ensure the installation meets their requirements. Just let us know before we start.
Are you insured for roofing work in Union City?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Union City?
We recommend an inspection every two to three years, especially after major storms. Union City's hot summers and windy afternoons can loosen fasteners over time. A quick inspection can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Hayward

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Hayward

All your work handled by qualified professionals in Hayward

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

224+ Verified Client Reviews in Hayward

⭐⭐⭐⭐⭐ 4.9/5 · 224 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Hayward · Response within 24h · No commitment · ☎ (510) 901-4954

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Hayward ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm