Serving the Hayward area  ·  (510) 901-4954  ·  Open Mon-Sun 7am-7pm
📞 (510) 901-4954 Free Quote

Metal Roofing in Alameda, CA (94502) · Local Professionals

Hayward Metal Roofing · Fast response in Alameda and the Hayward area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+224Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Alameda's island Victorians, Craftsman bungalows, and Navy-era cottages sit in salt-tinged bay air, and their roofs take a beating that inland East Bay homes never see. From the Gold Coast mansions on Central Avenue to the tight-lot cottages off Webster Street, the housing stock here dates from the 1890s through the 1950s, with a mix of low-pitched shingle roofs and original detailing that demands a roofer who understands old island construction.

Homeowners in Alameda (94502) call Hayward Metal Roofing because we know the difference between a bayfront roof and a hilltop one. Whether you are near Crab Cove or over by the Alameda South Shore Center, we bring metal roofing solutions that hold up to salt air, wind-driven rain, and the occasional hot offshore spell. Our team serves Alameda and the surrounding areas from our Hayward base, and we are fully insured with general liability and workers' compensation.

Metal Roofing in Alameda (94502)

Alameda is flat, but it is not simple. The island's clay soil and high water table mean proper drainage and flashing details matter more than on a hillside lot. Many properties here have narrow side yards and shared driveways, so staging materials and equipment takes planning. The salt air near the shoreline accelerates corrosion on fasteners and flashing, which is why we often recommend copper and specialty metal roofing for historic homes and standing seam for newer construction. Older Victorians and Craftsman cottages around the East End and Fernside frequently have complex roof lines, multiple gables, and original skylights or chimneys that need careful flashing repair. Navy-era cottages on the West End often have low-slope roofs where a retrofit over existing shingles can be a cost-effective option, provided the existing layers meet code limits.

Our team has worked on Alameda roofs for years, from the streets near Lincoln Park to the commercial buildings along the estuary. We understand the local building department's permit thresholds and inspection requirements, and we always defer to the City of Alameda's current rules, which you should verify with the building department. We also know how to coordinate with HOA design review when a historic district or association restricts panel profiles and colors.

Our services in Alameda

How a Job Works in Alameda

Step 1: You call us at (510) 901-4954 or request a free on-site assessment. We inspect your roof, check the attic and flashing details, and talk through your options, whether that is a repair, a coating, or a full replacement. We provide a written estimate with clear pricing and no pressure.

Step 2: Once you approve, we schedule the work and handle the permit application with the City of Alameda. On tight Alameda lots, we plan material deliveries to avoid blocking neighbors' driveways and coordinate with any HOA design review. Our crew protects landscaping and walks the roof carefully, especially on older homes where decking may need repair before new metal goes down.

Step 3: After installation, we clean up thoroughly, haul away all debris, and do a final walkthrough with you. We make sure you understand the warranty, maintenance needs, and how to spot any issues. We leave your property clean and your roof ready for the next rainy season.

Pricing for metal roofing in Alameda depends on the size and complexity of your roof, access, the condition of the existing decking, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, but code limits on the number of existing layers may affect feasibility. Repairs start at $450, and screw replacement and re-fastening start at $750. Copper and specialty metal roofing starts at $20 per square foot, which is common for historic homes. Coating and painting starts at $2.50 per square foot. For a free estimate tailored to your Alameda property, call (510) 901-4954.

My Victorian near the Gold Coast has original redwood decking and complex gables. Can you install metal without tearing off the old roof?
In many cases, yes, but it depends on the condition of the decking and the number of existing shingle layers. Alameda's older homes often have skip sheathing or solid decking that needs inspection. We will check for rot, verify code limits on layers, and recommend the best approach, whether that is a retrofit or a full tear-off, during a free on-site assessment.
A storm just lifted panels on my roof near Crab Cove. How fast can you respond for emergency repair in Alameda?
We prioritize storm and wind damage calls and can often schedule an inspection within 24 to 48 hours, depending on demand. Call us at (510) 901-4954 to report the issue. We will secure the roof if needed and provide a written repair estimate. For active leaks, we can also discuss temporary measures while we schedule permanent repairs.
What does a typical metal roof replacement cost for a 1,500-square-foot Craftsman in Alameda?
For a 1,500-square-foot home with a moderately complex roof, a metal roof replacement typically ranges from $13,500 to $18,000, based on our starting rate of $9 per square foot. Factors like access, decking repairs, flashing details, and material choice can push the price higher. We provide a detailed, itemized estimate after inspecting your roof.
Do I need a permit from the City of Alameda for a metal roof replacement, and how long does it take?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Alameda. Thresholds and fees vary, so we always verify current requirements with the City of Alameda Building Department. Permit timing can range from a few days to a couple of weeks depending on the scope and historic district review. We handle the application and inspections as part of our service.
My HOA requires a specific roof color and profile. Can you help with approval and ensure the installation meets their rules?
Yes, we regularly work with Alameda HOAs and historic design review committees. We can provide product samples, color chips, and specifications for your application. We recommend getting written approval before ordering materials, and we will coordinate scheduling to avoid conflicts with HOA rules on noise, parking, and work hours.
Are you fully insured for metal roofing work at my Alameda property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property throughout the project, and our team is happy to answer any questions about our coverage before work begins.
What maintenance does a metal roof need in Alameda's salt air, and when should I schedule it?
Salt air near the shoreline can corrode fasteners and flashing over time, so we recommend an annual inspection, ideally in late summer before the rainy season. Check for loose fasteners, debris in gutters, and any signs of corrosion or sealant wear. A coating or painting every 10 to 15 years can extend the life of the finish. We offer maintenance plans and free estimates for inspections.
Why choose us?

Trusted professionals in Hayward

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Hayward

All your work handled by qualified professionals in Hayward

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

224+ Verified Client Reviews in Hayward

⭐⭐⭐⭐⭐ 4.9/5 · 224 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Hayward · Response within 24h · No commitment · ☎ (510) 901-4954

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Hayward ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm