Serving the Hayward area  ·  (510) 901-4954  ·  Open Mon-Sun 7am-7pm
📞 (510) 901-4954 Free Quote

Metal Roofing in Fairview, CA (94542) · Local Professionals

Hayward Metal Roofing · Fast response in Fairview and the Hayward area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+224Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fairview sits up in the Hayward Hills where the streets curve and the lots slope, and the homes here take a real beating from bay wind and summer embers. Most of the houses are 1960s to 1980s split-levels and larger custom builds, many still wearing original composition shingles that are now 30 to 50 years old. If you live off Fairview Avenue or up near Five Canyons, you already know how fast a windy afternoon can find a loose shingle or a gap at the flashing.

Homeowners in 94542 call Hayward Metal Roofing because we know this hillside, not just the ZIP code. We have replaced and repaired roofs on the slopes above Castro Valley and around the Fairview district, and we understand how the afternoon wind off the bay works its way up the canyons. When your roof starts to fail up here, it usually fails at the fasteners and seams first, and that is exactly where we look.

Metal Roofing in Fairview (94542)

Fairview is not flatland roofing. The properties climb the Diablo Range foothills on clay soil, and many lots are cut into the grade, which means drainage, access, and staging all matter. A roof that sheds water fine on a flat lot in Southgate can pond or back up at a valley on a Fairview slope if the flashing and underlayment are not detailed for the terrain. The dry summers and hot offshore wind spells also raise ember risk in the eucalyptus and bay laurel pockets, so we pay close attention to valley closures, ridge caps, and the little gaps where embers can lodge. Winter rain coming in off the bay hits these hills hard, and we see plenty of failed fasteners and separated seams after a windy storm. Standing seam and metal roof replacement are the most common jobs we do here because they handle the wind uplift and the slope transitions better than aged shingles.

Our team has worked throughout Fairview and the surrounding Hayward neighborhoods, from the streets near the Cal State East Bay hillside to the older homes off Mission Boulevard. We know the local building department review, we know what the hillside wind does to exposed fasteners, and we know how to work on tight, sloped lots without tearing up your landscaping.

Our services in Fairview

How a Job Works in Fairview

Step 1: you call us at (510) 901-4954 or request a free estimate, and we set up an on-site assessment. We walk the roof, check the decking, flashing, and fasteners, and talk through whether a repair, a retrofit over your existing shingles, or a full replacement makes sense for your slope and your budget. You get a written scope before any work starts.

Step 2: we schedule the work and handle the permit paperwork with the local building department. On Fairview hillside lots, access can be tight, so we plan material staging and dumpster placement ahead of time. If your home is in an HOA or a design-review area, we help coordinate the panel profile and color approval. Most standing seam and replacement jobs take several days depending on roof size and complexity, and we keep you posted on weather delays.

Step 3: we clean up every day and do a final walkthrough with you. We magnet-sweep for nails, haul away old material, and make sure you know how the new roof sheds water and what to check after a big wind. We leave your property clean and we do not consider the job done until you have walked it with us.

Pricing in Fairview depends on the size and pitch of your roof, how tight the lot access is, the condition of the decking, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs start around $9 per linear foot. Every roof is different, so the only way to get a real number is a free on-site estimate. Call (510) 901-4954 and we will come out to your Fairview property.

My Fairview hillside home has a low-pitch roof and the afternoon wind keeps lifting shingles. Is standing seam worth it here?
On these exposed slopes above Hayward, standing seam is often the better long-term choice because the panels are fastened with concealed clips and interlocking seams, so there are no exposed fasteners for the wind to work loose. We see a lot of wind-lifted and peeled panels after storms in Fairview, and standing seam handles that uplift much better than aged composition shingles. We will check your roof pitch and decking during the free estimate and tell you honestly whether a retrofit or a full replacement makes more sense.
A storm just tore up part of my roof in Fairview. How fast can you get out for emergency repairs?
We offer free storm and wind damage inspections, and we prioritize active leaks and wind damage in the Fairview and Hayward Hills area. Call (510) 901-4954, describe what happened, and we will schedule the soonest available visit. If water is actively coming in, we can talk through temporary measures on the phone while we get a crew out to you.
What does a typical metal roof replacement cost for a 1960s split-level in Fairview?
Most Fairview split-levels fall in a range where metal roof replacement starts around $9 per square foot, but the final number depends on roof size, pitch, how much decking needs repair, and access on your slope. A simple single-story ranch will land lower than a multi-plane split-level with valleys and dormers. We give you a written estimate after we walk the roof, and there is no charge for that visit.
Do I need a permit to replace my roof in Fairview, and who handles it?
A full replacement or re-roof commonly requires a roofing permit, and the thresholds, fees, and inspection requirements vary by jurisdiction. We handle the permit paperwork with the local building department as part of the job and make sure the work is inspected properly. If your home is in a historic district or an HOA design-review area, we also help coordinate the panel profile and color approval before we order materials.
My neighbor and I share a property line in Fairview, and my new roof will be close to it. What should I know?
Property line rules and setback requirements are set by local code, so we always recommend confirming your lot lines before work starts, especially on tight hillside lots where the roof overhang can come close to a neighbor's side. If your HOA has design rules, we help you get the approval in hand before ordering panels. We can also walk the property line with you during the estimate so there are no surprises.
Are you fully insured for work on my Fairview property?
Yes. Hayward Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start, and we recommend asking any contractor for that documentation before they set foot on your roof.
What maintenance should I do on a metal roof in Fairview before the rainy season?
Before the winter rains, we recommend a quick inspection of the fasteners, seams, and flashing, especially around chimneys and skylights where we see most leaks. Clear the gutters of eucalyptus leaves and pine needles, which pile up fast on Fairview hillside lots, and check that downspouts are moving water away from the foundation. A free estimate inspection in the fall is a good way to catch a small issue before it becomes a leak.
Why choose us?

Trusted professionals in Hayward

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Hayward

All your work handled by qualified professionals in Hayward

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

224+ Verified Client Reviews in Hayward

⭐⭐⭐⭐⭐ 4.9/5 · 224 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Hayward · Response within 24h · No commitment · ☎ (510) 901-4954

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Hayward ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm