Licensed & Insured, in Hayward and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Hayward
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (510) 901-4954 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Hayward and surrounding areas · On-site visits included · Free estimate within 24h
Hayward Metal Roofing is a team of local certified professionals based in Hayward. We respond quickly in Hayward and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (510) 901-4954⭐⭐⭐⭐⭐ 4.9/5 · 224 verified Google reviews
“They installed a corrugated metal roof on our equipment hangar and it came out rock solid. The crew of four knocked out the whole thing in two days and swept the gravel lot clean before they left. Way better than the old failing panels.”
Commercial Metal Roofing
“Had them do a metal roof-over-shingles retrofit on our porch and back section of the house. The stone-coated steel panels look great and we skipped the whole tear-off mess. Took about three days and they hauled away every scrap.”
Metal Roof Over Shingles (Retrofit)
“Our old red barn roof was rusting through and I figured we'd have to tear the whole thing down. Instead they re-fastened the panels, replaced the rotten screws, and put on a fresh coat of metal roof coating. It's been through two storms already and not a single leak. Genuinely relieved.”
Agricultural Metal Roofing
“Went with standing seam for the whole house, around 2,200 square feet. The seams are perfectly straight and the dark bronze finish looks fantastic against the siding. Crew was respectful and kept the yard tidy each evening.”
Standing Seam Metal Roofing
“Found a leak around the vent pipe after the last rain and they had someone out within two days. Fixed the flashing and sealed the penetration in about an hour. Only gripe is they were a little late to the appointment, but the repair itself was spot on.”
Metal Roof Leak Repair
“Full metal roof replacement on our 1970s ranch house. They tore off the old rusted panels, checked the decking, and had the new ribbed panels on in four days. The before-and-after is night and day, the house looks twenty years newer.”
Metal Roof Replacement
“Booked an inspection before buying a house and I'm glad I did. They walked the whole metal roof, flagged a few loose fasteners and a worn pipe boot, and gave me a written report with photos. Honest and thorough, no pressure to upsell anything.”
Metal Roof Inspection
“We wanted something distinctive for our home and they recommended copper for the front-facing sections of the metal roof. The craftsmanship is beautiful and the flashing around the chimney is seamless. Pricey, sure, but the crew clearly knew specialty metal inside and out. Would use them again in a heartbeat.”
Copper & Specialty Metal RoofingReal photos of our work in Hayward · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $12/sq ft | Includes tear-off, synthetic underlayment, concealed fasteners and custom trim, priced higher on steep or cut-up roofs |
| Corrugated and ribbed panel installation | Starting at $8/sq ft | Includes tear-off, underlayment and exposed-fastener panels, with price rising for deck repairs or complex flashing |
| Metal roof over shingles retrofit | Starting at $9/sq ft | Includes code-compliant retrofit over existing shingles, subject to layer limits and local building department approval |
| Complex or large-scale job | On estimate | Hillside access, multiple valleys, skylights and historic or HOA review require an on-site look before pricing |
| Travel | Included | in Hayward and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam install | Starting at $10/sq ft | Includes tear-off, underlayment and panels; pitch and roof complexity move the rate up. |
| Mechanically seamed install | Starting at $13/sq ft | Includes power-seamed panels and clips; wind exposure and panel gauge shift the price. |
| Standing seam over existing shingles | Starting at $9/sq ft | Includes framing check and panels; existing layer count and code limits affect the scope. |
| Complex or large-scale job | On estimate | Cut-up hillside roofs with valleys, dormers and skylights need an on-site look first. |
| Travel | Included | In Hayward and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, panels, and flashing; pitch and deck condition move the price. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and raised seams; roof complexity and panel length drive the higher figure. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Includes stamped or granule-coated panels, new underlayment, and trim; steep pitches add labor. |
| Copper and specialty metal | On estimate | Material cost and custom detailing require an on-site measure before any number is quoted. |
| Deck repair and disposal | Included | Old roofing hauled away and rotten sheathing replaced; hidden damage is priced before work continues. |
| Estimate | Free | On-site inspection and written scope at (510) 901-4954, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated or ribbed panel recover | Starting at $7/sq ft | Covers panels, underlayment, standard flashing and fastening on a low-pitch single-story Hayward ranch |
| Standing seam recover | Starting at $11/sq ft | Concealed-fastener panels on new battens, priced higher for steep hillside pitches and wind exposure |
| Stone-coated steel or metal shingle recover | Starting at $10/sq ft | Textured or stamped panels for HOA and historic review, includes profile layout and trim package |
| Deck repair or partial re-sheathing | On estimate | Priced per sheet after we open the roof, since rot is only visible once the old layer is probed |
| Travel | Included | In Hayward and surrounding East Bay cities, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (510) 901-4954, no obligation to book the job |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (reseal, fasteners, small flashing) | Starting at $450 | Covers a single-issue fix, with cost rising by roof pitch, height, and access difficulty |
| Panel replacement (one to three panels) | Starting at $850 | Includes matching panel, fasteners, and sealant; profile and gauge drive the price |
| Leak diagnosis and repair | Starting at $650 | We trace the water path and repair the source; concealed leaks may need more time |
| Storm or wind damage repair | On estimate | Scope depends on panel count and insurance documentation, so we inspect before quoting |
| Travel | Included | in Hayward and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak source repair | Starting at $450 | Covers one confirmed leak, fastener or washer replacement, and a water test on standard access. |
| Flashing or penetration rebuild | Starting at $650 | Includes new metal flashing at a chimney, wall, or skylight, plus sealant and re-testing. |
| Multi-point or steep-access repair | On estimate | Needs an on-site look when the roof is steep, access is tight, or several leaks are involved. |
| Emergency tarping during storms | Starting at $350 | Priority response to stop active water intrusion until a permanent repair can be scheduled. |
| Travel | Included | In Hayward and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small area) | Starting at $750 | Covers failed screws and washers in one roof section, priced by fastener count and access. |
| Full field re-screw (single story) | Starting at $1,850 | Replaces every fastener across the panel field with oversized screws and UV-resistant washers. |
| Full field re-screw (two story or steep pitch) | Starting at $2,900 | Adds staging and fall protection for hillside and multi-level Hayward homes. |
| Rusted screw extraction and oversized retrofit | On estimate | Needs an on-site look to assess hole condition and panel integrity before quoting. |
| Travel | Included | In Hayward and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (shed, carport) | Starting at $5.50/sq ft | Includes 26 or 29 gauge panels, self-sealing screws, closures and basic trim on simple structures. |
| R-panel / ribbed roof (garage, workshop) | Starting at $6.75/sq ft | Includes heavier 26 gauge ribbed panels, full closure set and trim, priced by roof pitch and access. |
| Tear-off and disposal of old roof | Starting at $1.50/sq ft | Covers removal and hauling of old shingles or rusted panels, with layer count driving the total. |
| Purlins and framing repair | On estimate | Rotted purlins or sagging framing need an on-site look before we commit to a repair number. |
| Travel | Included | In Hayward and surrounding East Bay cities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (510) 901-4954, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard profile | Starting at $9/sq ft | Includes panels, underlayment and standard trim; roof pitch and complexity move the price |
| Premium slate or shake profile | Starting at $12/sq ft | Heavier embossed panels and upgraded finish; dormers and valleys add labor |
| Tear-off and deck repair | On estimate | Existing layers, sheathing condition and access determine the removal cost |
| Retrofit over existing shingles | On estimate | Requires code-compliant layer count and sound deck before we quote the recover |
| Travel | Included | In Hayward and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, simple gable roof | Starting at $9/sq ft | Includes tear-off of one shingle layer, synthetic underlayment, standard flashings, and disposal on an accessible ranch roof. |
| Stone-coated steel, cut-up or steep roof | From $12/sq ft | Covers multiple valleys, dormers, and steep pitches that slow the crew and require extra safety rigging on Hayward Hills lots. |
| Retrofit over existing shingles | From $8/sq ft | Panels set over a prepared existing roof, subject to code layer limits and a deck inspection before work starts. |
| Deck repair and sheathing replacement | On estimate | Priced per sheet after tear-off reveals soft or delaminated decking common on 1940s and 1950s Hayward homes. |
| Travel | Included | In Hayward and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and flashing work | Starting at $20/sq ft | Includes formed copper pans and soldered seams for bay windows, porches and dormers; complexity of the detail moves the price. |
| Zinc or aluminum accent roof | Starting at $24/sq ft | Includes pre-weathered zinc or formed aluminum panels; access on steep Hayward Hills lots raises the installed rate. |
| Full architectural copper roof | Starting at $38/sq ft | Includes custom pans, valleys, ridges and soldered joints; historic profile matching and HOA review add labor. |
| Complex or large-scale job | On estimate | Multi-detail historic homes and full roofs need an on-site measurement and fabrication plan before a number is given. |
| Travel | Included | In Hayward and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic reflective coating (clean, prep, one coat) | Starting at $2.50/sq ft | Pressure wash, spot prime, and one reflective coat on a sound panel roof with light chalk. |
| Rust conversion and two-coat system | Starting at $3.75/sq ft | Adds rust converter, bare-metal primer, and a second finish coat for panels with surface rust at seams. |
| Coating with fastener replacement | Starting at $4.50/sq ft | Includes re-fastening failed screws and washers before coating, priced by the count of failed fasteners. |
| Commercial or steep hillside access | On estimate | Bayfront industrial panels and steep Hayward Hills lots need an on-site look for staging and safety. |
| Travel | Included | in Hayward and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing repair | Starting at $600 | Includes inspection, removal of old flashing, custom-bent step and counterflashing, and fastening; price rises with roof height and access difficulty. |
| Skylight flashing repair or curb rebuild | Starting at $850 | Covers removal of old flashing, new pan and curb flashing, and water test; higher cost if curb must be rebuilt or sheathing replaced. |
| Valley metal replacement | Starting at $700 | Includes cutting out corroded valley metal, installing new W-valley, and sealing; price depends on valley length and roof pitch. |
| Complex or multi-location flashing job | On estimate | Multiple leaks, stucco transitions, or rotted sheathing require an on-site inspection before we can give an accurate number. |
| Travel | Included | No separate call-out or mileage fee in Hayward and surrounding areas like Castro Valley, San Lorenzo, and San Leandro. |
| Estimate | Free | We respond within 24 hours at (510) 901-4954 with a written, no-obligation estimate. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Edge inspection and re-fastening | Starting at $1,200 | Covers inspection, eave and rake re-fastening with correct gasketed screws on a standard single-family roof. |
| Rail and edge hardware installation | Starting at $1,450 | Includes rail or bracket hardware over entries and walkways; price rises with linear footage and pitch. |
| Closure and gasket upgrade | Starting at $1,300 | Fits correct profile closures and fresh gaskets at eave and ridge; older installs with crushed closures cost more. |
| Complex or steep-access job | On estimate | Steep Hayward Hills pitches, third-story rakes, or heavy canopy need an on-site look before pricing. |
| Travel | Included | in Hayward and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and flashing inspection with photo documentation, written findings, and a repair versus replacement recommendation. |
| Minor repair (screws, sealant, flashing) | Starting at $285 | Replaces backed-out screws, reseals penetrations, and reseats lifted panels; price moves with roof height and access. |
| Panel replacement (single panel) | Starting at $650 | Removes and replaces one damaged panel with matching profile; steeper roofs and discontinued profiles increase the cost. |
| Partial re-roof (slope or section) | On estimate | Needs an on-site look to confirm underlayment condition, panel availability, and the true extent of storm damage. |
| Travel | Included | In Hayward and surrounding East Bay cities, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (510) 901-4954, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Visual inspection (single-story, low pitch) | Free estimate | Full roof and flashing check with photos, priced by roof size and number of slopes. |
| Fastener and seam test | Starting at $250 | Hands-on testing of screws, washers, and seam clips on older exposed-fastener and standing seam roofs. |
| Leak trace inspection | Starting at $350 | Targeted water-entry search at flashing and penetrations, priced by roof pitch and access difficulty. |
| Insurance and transaction report | On estimate | Written report with photos and remaining service life, scoped after we see roof size and penetrations. |
| Travel | Included | in Hayward and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes 5 inch K-style, hidden hangers, and standard downspout count; larger trough raises it. |
| Oversized trough with leaf guard | Starting at $14/linear ft | 6 inch trough and debris-shedding guard; priced up for heavy eucalyptus and oak leaf load. |
| Half-round steel or aluminum | Starting at $16/linear ft | Period-correct profile for older cottages; custom brackets and hanger spacing add labor. |
| Downspout routing and drainage | Starting at $180 per downspout | Includes buried line, dry well, or splash block; distance from the wall moves the price. |
| Fascia repair before hanging | On estimate | Rotted or soft fascia must be replaced before a hanger can carry load; needs an on-site look. |
| Estimate | Free | Response within 24 hours at (510) 901-4954, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial metal roof inspection and estimate | Free estimate | On-site inspection, photo documentation, and written scope with panel and fastener recommendations. |
| Exposed-fastener panel re-roof | Starting at $9 per sq ft | Includes tear-off, underlayment, new screw-down panels, and flashing for standard commercial buildings. |
| Standing seam commercial installation | Starting at $14 per sq ft | Concealed fasteners, long panel runs, and full flashing package for low-slope warehouses. |
| Agricultural building metal roof | On estimate | Barns, workshops, and outbuildings need a site look for span, access, and structural condition. |
| Travel | Included | In Hayward and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (510) 901-4954, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Hayward need a crew that understands the specific demands of East Bay homes, not a generic installer passing through. Hayward Metal Roofing is built for this ground: steep mountain pitches, heavy tree cover, high-elevation exposure, and a large stock of aging screw-down roofs whose fasteners are backing out. We handle the full scope of Metal Roof Installation, replacement, re-roof, and repair on homes across Hayward, Castro Valley, San Lorenzo, San Leandro, and Union City, with straight guidance on what your roof actually needs.
Our network of licensed, bonded, and insured local contractors works on the mix of housing that defines this area, from Victorian and Craftsman cottages near Downtown Hayward to post-war tract ranches in Southgate and the larger split-levels climbing the Hayward Hills. Whether you need a full standing seam system or a targeted fix, call (510) 901-4954 or request a free estimate to get an honest read on your roof.
Metal roofs fail in predictable ways, and almost every active leak traces back to one of a few causes. On 15 to 30 year old exposed-fastener roofs, the number one culprit is fasteners backing out as the EPDM sealing washers dry, shrink, and crack, letting water slip past the screw head. Seams can separate as panels expand and contract with thermal movement. Pipe boots and flashing at chimneys, skylights, and valleys fail when sealant ages out. Wind can lift and peel panels after a storm, and fallen limbs can puncture even heavy-gauge steel.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time you see a stain on the ceiling, sheathing may already be rotting and insulation soaked. Our Metal Roof Leak Repair team finds the actual source, not just the wet spot, and fixes it correctly.
The honest call between repair and replacement depends on the roof, not on a sales quota. If the panels are sound and the problem is fasteners and seals, a full Screw Replacement & Re-Fastening often restores a watertight roof for a fraction of replacement cost. If the metal is corroded through or the deck is failing, replacement is the right answer. Call (510) 901-4954 to talk through your options and get a free estimate.
We install the systems that fit Hayward homes and outbuildings: Standing Seam Metal Roofing with concealed clips and no exposed fasteners, Corrugated & Ribbed Panel Roofing as the economical workhorse for cabins, barns, and workshops, plus Metal Shingle Roofing and Stone-Coated Steel Roofing for a more traditional look. For accents and architectural detail, we also work in Copper & Specialty Metal Roofing.
The honest comparison is simple: standing seam costs more up front but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option; when it is not, tear-off is the right call. We match the system to your home, not the other way around.
Metal roof projects are typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Typical ranges vary widely, and final pricing depends on the roof and site conditions, so we quote after seeing the actual job.
Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer. For a clearer picture, see our pricing page, then request a free estimate or free roof inspection to get numbers for your specific roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find and leave the coverage call to the people who make it.
On permits, the rules are informational, not advice. In most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, always verify with the Hayward building or planning department before starting your project. For documentation or inspection questions, contact us.
Ready to get started? Hayward Metal Roofing serves in Hayward and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Hayward · Response within 24h · No commitment · ☎ (510) 901-4954
Your Free Quote Request