Serving the Hayward area  ·  (510) 901-4954  ·  Open Mon-Sun 7am-7pm
📞 (510) 901-4954 Free Quote

Metal Roofing in San Leandro, CA (94577) · Local Professionals

Hayward Metal Roofing · Fast response in San Leandro and the Hayward area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+224Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

San Leandro is a city of post-war ranches and bungalows, many with low-pitched shingle and tile roofs that are now decades past their prime. From the flat blocks near the bay to the older homes off Estudillo Avenue, these roofs take a beating from sun, wind, and winter rain.

Homeowners in 94577 call Hayward Metal Roofing because we know the housing stock here, from the stucco ranches in Broadmoor to the bungalows near downtown. We are based in Hayward, just up the road, and we specialize in metal roof replacement and leak repair for San Leandro properties.

Metal Roofing in San Leandro (94577)

San Leandro sits on flat bay plain and gentle rises, with many lots laid out in tight grids. That means access can be tricky for delivery trucks and staging materials, especially in neighborhoods like Davis Tract and Floresta Gardens where driveways are narrow and street parking is limited. The clay soil and winter rains also mean proper drainage and flashing details matter more than most homeowners realize. We see a lot of failed fasteners, separated seams, and flashing gaps on older roofs, particularly after the windy spells that come through the East Bay. Our team is used to working around mature trees, tight side yards, and the occasional HOA design review.

We have been serving San Leandro and the surrounding Hayward area for years, and we understand the local building department’s permit process. Whether you need a full replacement or a targeted leak repair, we bring the right materials and experience to get it done right.

Our services in San Leandro

How a Job Works in San Leandro

Step 1: You call us at (510) 901-4954 or request a free estimate online. We schedule an on-site assessment at your San Leandro property, usually within a couple of days. We inspect your roof, take measurements, and discuss your options, from a full metal roof replacement to a retrofit over existing shingles.

Step 2: Once you approve the scope and price, we handle the paperwork, including pulling the required roofing permit from the City of San Leandro. You can verify local requirements on the City of San Leandro website. We coordinate delivery and staging to minimize disruption on your street, and our crew gets to work, often completing most residential roofs in a few days depending on weather and complexity.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeping for nails and debris removal. We walk the finished roof with you, answer any questions, and make sure you are satisfied before we consider the job complete. We leave your property clean and your roof ready for decades of service.

Pricing for metal roofing in San Leandro depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam from $10, and metal roof replacement from $9. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. For smaller jobs, metal roof repair and leak repair start at $450, and screw replacement or re-fastening starts at $750. We always provide a free, detailed estimate so you know exactly what to expect. Call us at (510) 901-4954 to schedule yours.

My 1950s ranch in Broadmoor has a low-pitch roof. Can metal roofing work on it?
Yes, metal roofing is an excellent choice for low-pitch roofs, but the specific profile and installation method matter. We often recommend standing seam or corrugated panels with proper underlayment for low-slope applications. Our team will assess your roof’s pitch and structure during the free estimate and recommend the best system for your home.
A windstorm just lifted some panels on my roof in San Leandro. How fast can you respond?
We prioritize storm damage calls and can often provide a free inspection within 24 to 48 hours. Call us at (510) 901-4954 to report the damage. We will secure the area if needed and provide a written estimate for repairs, which you can use for insurance documentation.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch in San Leandro?
For a 1,500-square-foot ranch, a basic corrugated panel roof might start around $8,250, while standing seam could range from $15,000 or more depending on complexity. Factors like roof accessibility, removal of old materials, and flashing details affect the final price. We provide a free estimate tailored to your specific roof.
Do I need a permit to replace my roof in San Leandro?
Yes, roofing permits are typically required for a full replacement or re-roof in San Leandro. The exact requirements and fees vary, so it is best to check with the city. We handle the permit application process for you and ensure all work meets local code.
My HOA requires approval for exterior changes. Can you help with that?
We can provide material samples and specifications for your HOA submission. While we cannot obtain approval on your behalf, we will coordinate with your HOA’s timeline and provide the documentation they need. Many HOAs in San Leandro have design guidelines, so it is best to start that process early.
Are you fully insured for work at my San Leandro home?
Yes, we are fully insured with both general liability and workers’ compensation coverage. Your property and our crew are protected throughout the project.
How often should I have my metal roof inspected in San Leandro?
We recommend an inspection every two to three years, especially after major storms. San Leandro’s windy spells and winter rains can loosen fasteners or cause flashing issues. Regular maintenance, like clearing debris from gutters and checking for loose panels, will extend the life of your roof. We offer free inspections to catch small problems before they become costly.
Why choose us?

Trusted professionals in Hayward

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Hayward

All your work handled by qualified professionals in Hayward

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

224+ Verified Client Reviews in Hayward

⭐⭐⭐⭐⭐ 4.9/5 · 224 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Hayward · Response within 24h · No commitment · ☎ (510) 901-4954

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Hayward ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm